[US Plug] BLUETTI AC300 + B300 Power Station 3000W 3072Wh Solar Generator Home Battery Backup Home Use LiFePO4 Battery Solar

Expand Your Power At Will

BLUETTI AC300 is 100% modular, supporting up to 4×B300 (3,072Wh per pack) battery modules for a groundbreaking

capacity of 12,288Wh! Power your basic family needs for DAYS during emergencies or power outages!

3000W Pure Sine Wave Inverter

The inverter can adjust the charging rate from 1800W to 3000W via wall outlets according to your needs.
* The AC input is 1800W by default, which can boost to 3000W with the 30A charging cable(Sold separately on BLUETTI).

5400W Blazing Input Rate

Plug in the wall outlet and solar panels, you can fast charge the AC300 much faster at a 5,400W Max rate, saving you a lot of charging time. The 5,400W input rate combines 2,400W solar and 3,000W AC, which requires two B300 batteries.

Or the rate would be limited to 3,000W with only one B300.

240V Connection Available

With the Fusion Box Pro(P030A), you can connect two AC300s in series for 240V/6,000W

output and a total capacity of 24,576Wh(4 B300s for each AC300).

24/7 UPS Home Backup

Using BLUETTI Smart Home Panel, you can tie the AC300 power system to your home grid. Always get you prepared for power outages. One System For All Power Needs
Power your home whenever power outages occur. Easy setup, Just Power On.

FAQ:

Q1: How to claim the warranty and extended warranty?

A:Please refer to the warranty card you received from where you have orderedthe product from. Any extended warranty, if purchased, will only take effectafter the default warranty has expired. Can the unit firmware be upgraded?The firmware including ARM, DSP, IoT and BMS can be upgraded online throughBLUETTI APP

Q2: Can it be charged and discharged at the same time?

A:Yes, the unit supports pass-through charging function for both AC and DCoutputs.

Q3: What is the UPS switching latency?

20ms from offline UpS.

Q4: Can I connect my two AC300+B300 units with a Fusion Box(P020A) toachieve double the output power, voltage and capacity?

A: Only Fusion Box Pro(P030A) can be connected two set of AC300+B300 powerstation.

Q5: Can I use third-party solar panels to charge the unit?

A: Yes, the third-party solar panels are available as long as they contain MC4connectors, besides the voltage (in series or parallel) is between 12V to 150Vand the maximum combined input power from the two pY input ports is 2400W. If the open circuit voltage of the panels is between 150V-550V, you canchoose D300s to drop down the voltage of the panels to achieve solar charging.

Q6: How do I know whether my appliance can work well with the power station?

A: Calculate how much the continuous loads are for your appliances are in total.As long as they do not exceed the rated output power of the power station, itshould work.

Q7: How can I connect the product to my main panel?

A:To install the grid-tie power system, an electrician with a professional technician